Файловый менеджер

Файловый менеджер - Редактировать - /home/beautybuzzbeyond/public_html/private/init.d.tar

Назад
README��0000644��00000002211�14720432463�0005425 0��ustar�00��You are looking for the traditional init scripts in /etc/rc.d/init.d, and they are gone? Here's an explanation on what's going on: You are running a systemd-based OS where traditional init scripts have been replaced by native systemd services files. Service files provide very similar functionality to init scripts. To make use of service files simply invoke "systemctl", which will output a list of all currently running services (and other units). Use "systemctl list-unit-files" to get a listing of all known unit files, including stopped, disabled and masked ones. Use "systemctl start foobar.service" and "systemctl stop foobar.service" to start or stop a service, respectively. For further details, please refer to systemctl(1). Note that traditional init scripts continue to function on a systemd system. An init script /etc/rc.d/init.d/foobar is implicitly mapped into a service unit foobar.service during system initialization. Thank you! Further reading: man:systemctl(1) man:systemd(1) http://0pointer.de/blog/projects/systemd-for-admins-3.html https://www.freedesktop.org/wiki/Software/systemd/Incompatibilities ��functions��0000644��00000044002�14720432463�0006504 0��ustar�00��# --Shell-script-- # # functions This file contains functions to be used by most or all # shell scripts in the /etc/init.d directory. # TEXTDOMAIN=initscripts # Make sure umask is sane umask 022 # Set up a default search path. PATH="/sbin:/usr/sbin:/bin:/usr/bin" export PATH if [ $PPID -ne 1 -a -z "$SYSTEMCTL_SKIP_REDIRECT" ] && \ [ -d /run/systemd/system ] ; then case "$0" in /etc/init.d/\|/etc/rc.d/init.d/) _use_systemctl=1 ;; esac fi systemctl_redirect () { local s local prog=${1##/} local command=$2 local options="" case "$command" in start) s=$"Starting $prog (via systemctl): " ;; stop) s=$"Stopping $prog (via systemctl): " ;; reload\|try-reload) s=$"Reloading $prog configuration (via systemctl): " ;; restart\|try-restart\|condrestart) s=$"Restarting $prog (via systemctl): " ;; esac if [ -n "$SYSTEMCTL_IGNORE_DEPENDENCIES" ] ; then options="--ignore-dependencies" fi if ! systemctl show "$prog.service" > /dev/null 2>&1 \|\| \ systemctl show -p LoadState "$prog.service" \| grep -q 'not-found' ; then action $"Reloading systemd: " /bin/systemctl daemon-reload fi action "$s" /bin/systemctl $options $command "$prog.service" } # Get a sane screen width [ -z "${COLUMNS:-}" ] && COLUMNS=80 # Read in our configuration if [ -z "${BOOTUP:-}" ]; then if [ -f /etc/sysconfig/init ]; then . /etc/sysconfig/init else # verbose ->> very (very!) old bootup look (prior to RHL-6.0?) # color ->> default bootup look # other ->> default bootup look without ANSI colors or positioning BOOTUP=color # Column to start "[ OK ]" label in: RES_COL=60 # terminal sequence to move to that column: MOVE_TO_COL="echo -en \\033[${RES_COL}G" # Terminal sequence to set color to a 'success' (bright green): SETCOLOR_SUCCESS="echo -en \\033[1;32m" # Terminal sequence to set color to a 'failure' (bright red): SETCOLOR_FAILURE="echo -en \\033[1;31m" # Terminal sequence to set color to a 'warning' (bright yellow): SETCOLOR_WARNING="echo -en \\033[1;33m" # Terminal sequence to reset to the default color: SETCOLOR_NORMAL="echo -en \\033[0;39m" # Verbosity of logging: LOGLEVEL=1 fi # NOTE: /dev/ttyS is serial console. "not a tty" is such as # /dev/null associated when executed under systemd service units. if LANG=C tty \| grep --quiet -e '$/dev/ttyS\\|not a tty$'; then BOOTUP=serial MOVE_TO_COL= SETCOLOR_SUCCESS= SETCOLOR_FAILURE= SETCOLOR_WARNING= SETCOLOR_NORMAL= fi fi # Check if any of $pid (could be plural) are running checkpid() { local i for i in $* ; do [ -d "/proc/$i" ] && return 0 done return 1 } __kill_pids_term_kill_checkpids() { local base_stime=$1 shift 1 local pid= local pids=$* local remaining= local stat= local stime= for pid in $pids ; do [ ! -e "/proc/$pid" ] && continue read -r line < "/proc/$pid/stat" 2> /dev/null stat=($line) stime=${stat[21]} [ -n "$stime" ] && [ "$base_stime" -lt "$stime" ] && continue remaining+="$pid " done echo "$remaining" [ -n "$remaining" ] && return 1 return 0 } __kill_pids_term_kill() { local try=0 local delay=3; local pid= local stat= local base_stime= # We can't initialize stat & base_stime on the same line where 'local' # keyword is, otherwise the sourcing of this file will fail for ksh... stat=($(< /proc/self/stat)) base_stime=${stat[21]} if [ "$1" = "-d" ]; then delay=$2 shift 2 fi local kill_list=$* kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list) [ -z "$kill_list" ] && return 0 kill -TERM $kill_list >/dev/null 2>&1 sleep 0.1 kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list) if [ -n "$kill_list" ] ; then while [ $try -lt $delay ] ; do sleep 1 kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list) [ -z "$kill_list" ] && break let try+=1 done if [ -n "$kill_list" ] ; then kill -KILL $kill_list >/dev/null 2>&1 sleep 0.1 kill_list=$(__kill_pids_term_kill_checkpids $base_stime $kill_list) fi fi [ -n "$kill_list" ] && return 1 return 0 } # __proc_pids {program} [pidfile] # Set $pid to pids from /run* for {program}. $pid should be declared # local in the caller. # Returns LSB exit code for the 'status' action. __pids_var_run() { local base=${1##/} local pid_file=${2:-/run/$base.pid} local pid_dir=$(/usr/bin/dirname $pid_file > /dev/null) local binary=$3 [ -d "$pid_dir" ] && [ ! -r "$pid_dir" ] && return 4 pid= if [ -f "$pid_file" ] ; then local line p [ ! -r "$pid_file" ] && return 4 # "user had insufficient privilege" while : ; do read line [ -z "$line" ] && break for p in $line ; do if [ -z "${p//[0-9]/}" ] && [ -d "/proc/$p" ] ; then if [ -n "$binary" ] ; then local b=$(readlink /proc/$p/exe \| sed -e 's/\s(deleted)$//') [ "$b" != "$binary" ] && continue fi pid="$pid $p" fi done done < "$pid_file" if [ -n "$pid" ]; then return 0 fi return 1 # "Program is dead and /run pid file exists" fi return 3 # "Program is not running" } # Output PIDs of matching processes, found using pidof __pids_pidof() { pidof -c -o $$ -o $PPID -o %PPID -x "$1" \|\| \ pidof -c -o $$ -o $PPID -o %PPID -x "${1##/}" } # A function to start a program. daemon() { # Test syntax. local gotbase= force= nicelevel corelimit local pid base= user= nice= bg= pid_file= local cgroup= nicelevel=0 while [ "$1" != "${1##[-+]}" ]; do case $1 in '') echo $"$0: Usage: daemon [+/-nicelevel] {program}" "[arg1]..." return 1 ;; --check) base=$2 gotbase="yes" shift 2 ;; --check=?) base=${1#--check=} gotbase="yes" shift ;; --user) user=$2 shift 2 ;; --user=?) user=${1#--user=} shift ;; --pidfile) pid_file=$2 shift 2 ;; --pidfile=?) pid_file=${1#--pidfile=} shift ;; --force) force="force" shift ;; [-+][0-9]) nice="nice -n $1" shift ;; ) echo $"$0: Usage: daemon [+/-nicelevel] {program}" "[arg1]..." return 1 ;; esac done # Save basename. [ -z "$gotbase" ] && base=${1##/} # See if it's already running. Look only* at the pid file. __pids_var_run "$base" "$pid_file" [ -n "$pid" -a -z "$force" ] && return # make sure it doesn't core dump anywhere unless requested corelimit="ulimit -S -c ${DAEMON_COREFILE_LIMIT:-0}" # if they set NICELEVEL in /etc/sysconfig/foo, honor it [ -n "${NICELEVEL:-}" ] && nice="nice -n $NICELEVEL" # if they set CGROUP_DAEMON in /etc/sysconfig/foo, honor it if [ -n "${CGROUP_DAEMON}" ]; then if [ ! -x /bin/cgexec ]; then echo -n "Cgroups not installed"; warning echo else cgroup="/bin/cgexec"; for i in $CGROUP_DAEMON; do cgroup="$cgroup -g $i"; done fi fi # Echo daemon [ "${BOOTUP:-}" = "verbose" -a -z "${LSB:-}" ] && echo -n " $base" # And start it up. if [ -z "$user" ]; then $cgroup $nice /bin/bash -c "$corelimit >/dev/null 2>&1 ; $" else $cgroup $nice runuser -s /bin/bash $user -c "$corelimit >/dev/null 2>&1 ; $" fi [ "$?" -eq 0 ] && success $"$base startup" \|\| failure $"$base startup" } # A function to stop a program. killproc() { local RC killlevel= base pid pid_file= delay try binary= RC=0; delay=3; try=0 # Test syntax. if [ "$#" -eq 0 ]; then echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]" return 1 fi if [ "$1" = "-p" ]; then pid_file=$2 shift 2 fi if [ "$1" = "-b" ]; then if [ -z $pid_file ]; then echo $"-b option can be used only with -p" echo $"Usage: killproc -p pidfile -b binary program" return 1 fi binary=$2 shift 2 fi if [ "$1" = "-d" ]; then delay=$(echo $2 \| awk -v RS=' ' -v IGNORECASE=1 '{if($1!~/^[0-9.]+[smhd]?$/) exit 1;d=$1~/s$\|^[0-9.]$/?1:$1~/m$/?60:$1~/h$/?6060:$1~/d$/?246060:-1;if(d==-1) exit 1;delay+=d$1} END {printf("%d",delay+0.5)}') if [ "$?" -eq 1 ]; then echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]" return 1 fi shift 2 fi # check for second arg to be kill level [ -n "${2:-}" ] && killlevel=$2 # Save basename. base=${1##/} # Find pid. __pids_var_run "$1" "$pid_file" "$binary" RC=$? if [ -z "$pid" ]; then if [ -z "$pid_file" ]; then pid="$(__pids_pidof "$1")" else [ "$RC" = "4" ] && { failure $"$base shutdown" ; return $RC ;} fi fi # Kill it. if [ -n "$pid" ] ; then [ "$BOOTUP" = "verbose" -a -z "${LSB:-}" ] && echo -n "$base " if [ -z "$killlevel" ] ; then __kill_pids_term_kill -d $delay $pid RC=$? [ "$RC" -eq 0 ] && success $"$base shutdown" \|\| failure $"$base shutdown" # use specified level only else if checkpid $pid; then kill $killlevel $pid >/dev/null 2>&1 RC=$? [ "$RC" -eq 0 ] && success $"$base $killlevel" \|\| failure $"$base $killlevel" elif [ -n "${LSB:-}" ]; then RC=7 # Program is not running fi fi else if [ -n "${LSB:-}" -a -n "$killlevel" ]; then RC=7 # Program is not running else failure $"$base shutdown" RC=0 fi fi # Remove pid file if any. if [ -z "$killlevel" ]; then rm -f "${pid_file:-/run/$base.pid}" fi return $RC } # A function to find the pid of a program. Looks only at the pidfile pidfileofproc() { local pid # Test syntax. if [ "$#" = 0 ] ; then echo $"Usage: pidfileofproc {program}" return 1 fi __pids_var_run "$1" [ -n "$pid" ] && echo $pid return 0 } # A function to find the pid of a program. pidofproc() { local RC pid pid_file= # Test syntax. if [ "$#" = 0 ]; then echo $"Usage: pidofproc [-p pidfile] {program}" return 1 fi if [ "$1" = "-p" ]; then pid_file=$2 shift 2 fi fail_code=3 # "Program is not running" # First try "/run/.pid" files __pids_var_run "$1" "$pid_file" RC=$? if [ -n "$pid" ]; then echo $pid return 0 fi [ -n "$pid_file" ] && return $RC __pids_pidof "$1" \|\| return $RC } status() { local base pid lock_file= pid_file= binary= # Test syntax. if [ "$#" = 0 ] ; then echo $"Usage: status [-p pidfile] {program}" return 1 fi if [ "$1" = "-p" ]; then pid_file=$2 shift 2 fi if [ "$1" = "-l" ]; then lock_file=$2 shift 2 fi if [ "$1" = "-b" ]; then if [ -z $pid_file ]; then echo $"-b option can be used only with -p" echo $"Usage: status -p pidfile -b binary program" return 1 fi binary=$2 shift 2 fi base=${1##/} if [ "$_use_systemctl" = "1" ]; then systemctl status ${0##/}.service ret=$? # LSB daemons that dies abnormally in systemd looks alive in systemd's eyes due to RemainAfterExit=yes # lets adjust the reality a little bit if systemctl show -p ActiveState ${0##/}.service \| grep -q '=active$' && \ systemctl show -p SubState ${0##/}.service \| grep -q '=exited$' ; then ret=3 fi return $ret fi # First try "pidof" __pids_var_run "$1" "$pid_file" "$binary" RC=$? if [ -z "$pid_file" -a -z "$pid" ]; then pid="$(__pids_pidof "$1")" fi if [ -n "$pid" ]; then echo $"${base} (pid $pid) is running..." return 0 fi case "$RC" in 0) echo $"${base} (pid $pid) is running..." return 0 ;; 1) echo $"${base} dead but pid file exists" return 1 ;; 4) echo $"${base} status unknown due to insufficient privileges." return 4 ;; esac if [ -z "${lock_file}" ]; then lock_file=${base} fi # See if /var/lock/subsys/${lock_file} exists if [ -f /var/lock/subsys/${lock_file} ]; then echo $"${base} dead but subsys locked" return 2 fi echo $"${base} is stopped" return 3 } echo_success() { [ "$BOOTUP" = "color" ] && $MOVE_TO_COL echo -n "[" [ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS echo -n $" OK " [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL echo -n "]" echo -ne "\r" return 0 } echo_failure() { [ "$BOOTUP" = "color" ] && $MOVE_TO_COL echo -n "[" [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE echo -n $"FAILED" [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL echo -n "]" echo -ne "\r" return 1 } echo_passed() { [ "$BOOTUP" = "color" ] && $MOVE_TO_COL echo -n "[" [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING echo -n $"PASSED" [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL echo -n "]" echo -ne "\r" return 1 } echo_warning() { [ "$BOOTUP" = "color" ] && $MOVE_TO_COL echo -n "[" [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING echo -n $"WARNING" [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL echo -n "]" echo -ne "\r" return 1 } # Inform the graphical boot of our current state update_boot_stage() { if [ -x /bin/plymouth ]; then /bin/plymouth --update="$1" fi return 0 } # Log that something succeeded success() { [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_success return 0 } # Log that something failed failure() { local rc=$? [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_failure [ -x /bin/plymouth ] && /bin/plymouth --details return $rc } # Log that something passed, but may have had errors. Useful for fsck passed() { local rc=$? [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_passed return $rc } # Log a warning warning() { local rc=$? [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_warning return $rc } # Run some action. Log its output. action() { local STRING rc STRING=$1 echo -n "$STRING " shift "$@" && success $"$STRING" \|\| failure $"$STRING" rc=$? echo return $rc } # returns OK if $1 contains $2 strstr() { [ "${1#$2}" = "$1" ] && return 1 return 0 } # Check whether file $1 is a backup or rpm-generated file and should be ignored is_ignored_file() { case "$1" in ~ \| .bak \| .old \| .orig \| .rpmnew \| .rpmorig \| .rpmsave) return 0 ;; esac return 1 } # Convert the value ${1} of time unit ${2}-seconds into seconds: convert2sec() { local retval="" case "${2}" in deci) retval=$(awk "BEGIN {printf \"%.1f\", ${1} / 10}") ;; centi) retval=$(awk "BEGIN {printf \"%.2f\", ${1} / 100}") ;; mili) retval=$(awk "BEGIN {printf \"%.3f\", ${1} / 1000}") ;; micro) retval=$(awk "BEGIN {printf \"%.6f\", ${1} / 1000000}") ;; nano) retval=$(awk "BEGIN {printf \"%.9f\", ${1} / 1000000000}") ;; piko) retval=$(awk "BEGIN {printf \"%.12f\", ${1} / 1000000000000}") ;; esac echo "${retval}" } # Evaluate shvar-style booleans is_true() { case "$1" in [tT] \| [yY] \| [yY][eE][sS] \| [oO][nN] \| [tT][rR][uU][eE] \| 1) return 0 ;; esac return 1 } # Evaluate shvar-style booleans is_false() { case "$1" in [fF] \| [nN] \| [nN][oO] \| [oO][fF][fF] \| [fF][aA][lL][sS][eE] \| 0) return 0 ;; esac return 1 } # Apply sysctl settings, including files in /etc/sysctl.d apply_sysctl() { if [ -x /lib/systemd/systemd-sysctl ]; then /lib/systemd/systemd-sysctl else for file in /usr/lib/sysctl.d/.conf ; do is_ignored_file "$file" && continue [ -f /run/sysctl.d/${file##/} ] && continue [ -f /etc/sysctl.d/${file##/} ] && continue test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1 done for file in /run/sysctl.d/.conf ; do is_ignored_file "$file" && continue [ -f /etc/sysctl.d/${file##/} ] && continue test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1 done for file in /etc/sysctl.d/.conf ; do is_ignored_file "$file" && continue test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1 done sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1 fi } # A sed expression to filter out the files that is_ignored_file recognizes __sed_discard_ignored_files='/$~\\|\.bak\\|\.old\\|\.orig\\|\.rpmnew\\|\.rpmorig\\|\.rpmsave$$/d' if [ "$_use_systemctl" = "1" ]; then if [ "x$1" = xstart -o \ "x$1" = xstop -o \ "x$1" = xrestart -o \ "x$1" = xreload -o \ "x$1" = xtry-restart -o \ "x$1" = xforce-reload -o \ "x$1" = xcondrestart ] ; then systemctl_redirect $0 $1 exit $? fi fi strstr "$(cat /proc/cmdline)" "rc.debug" && set -x return 0 ��network��0000755��00000017605�14720432463�0006201 0��ustar�00��#! /bin/bash # # network Bring up/down networking # # chkconfig: - 10 90 # description: Activates/Deactivates all network interfaces configured to \ # start at boot time. # ### BEGIN INIT INFO # Provides: $network # Should-Start: iptables ip6tables NetworkManager-wait-online NetworkManager $network-pre # Short-Description: Bring up/down networking # Description: Bring up/down networking ### END INIT INFO # Source function library. . /etc/init.d/functions if [ ! -f /etc/sysconfig/network ]; then exit 6 fi . /etc/sysconfig/network if [ -f /etc/sysconfig/pcmcia ]; then . /etc/sysconfig/pcmcia fi # Check that networking is up. [ "${NETWORKING}" = "no" ] && exit 6 # if the ip configuration utility isn't around we can't function. [ -x /sbin/ip ] \|\| exit 1 CWD=$(pwd) cd /etc/sysconfig/network-scripts . ./network-functions # find all the interfaces besides loopback. # ignore aliases, alternative configurations, and editor backup files interfaces=$(ls ifcfg-* \| \ LC_ALL=C sed -e "$__sed_discard_ignored_files" \ -e '/$ifcfg-lo$\\|:\\|ifcfg-.-range$/d' \ -e '{ s/^ifcfg-//g;s/[0-9]/ &/}' \| \ LC_ALL=C sort -k 1,1 -k 2n \| \ LC_ALL=C sed 's/ //') rc=0 if ! [ -f /etc/sysconfig/disable-deprecation-warnings ]; then net_log $"You are using 'network' service provided by 'network-scripts', which are now deprecated." warning network >&2 net_log $"'network-scripts' will be removed in one of the next major releases of RHEL." warning network >&2 net_log $"It is advised to switch to 'NetworkManager' instead for network management." warning network >&2 # This disables additional warnings during the boot process: export DEPRECATION_WARNING_ISSUED='true' fi # See how we were called. case "$1" in start) [ "$EUID" != "0" ] && exit 4 rc=0 # IPv6 hook (pre IPv4 start) if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then /etc/sysconfig/network-scripts/init.ipv6-global start pre fi apply_sysctl #tell NM to reload its configuration if [ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ]; then nmcli connection reload fi # bring up loopback interface action $"Bringing up loopback interface: " ./ifup ifcfg-lo case "$VLAN" in yes) if [ ! -d /proc/net/vlan ] && ! modprobe 8021q >/dev/null 2>&1 ; then net_log $"No 802.1Q VLAN support available in kernel." fi ;; esac vlaninterfaces="" vpninterfaces="" xdslinterfaces="" bridgeinterfaces="" # bring up all other interfaces configured to come up at boot time for i in $interfaces; do unset DEVICE TYPE SLAVE NM_CONTROLLED eval $(LANG=C grep -F "DEVICE=" ifcfg-$i) eval $(LANG=C grep -F "TYPE=" ifcfg-$i) eval $(LANG=C grep -F "SLAVE=" ifcfg-$i) eval $(LANG=C grep -F "NM_CONTROLLED=" ifcfg-$i) if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi if [ "$SLAVE" = "yes" ] && ( ! is_nm_running \|\| is_false $NM_CONTROLLED ) ; then continue fi if [ "${DEVICE##cipcb}" != "$DEVICE" ] ; then vpninterfaces="$vpninterfaces $i" continue fi if [ "$TYPE" = "xDSL" -o "$TYPE" = "Modem" ]; then xdslinterfaces="$xdslinterfaces $i" continue fi if [ "$TYPE" = "Bridge" ]; then bridgeinterfaces="$bridgeinterfaces $i" continue fi if [ "$TYPE" = "IPSEC" ] \|\| [ "$TYPE" = "IPIP" ] \|\| [ "$TYPE" = "GRE" ]; then vpninterfaces="$vpninterfaces $i" continue fi if [ "${DEVICE%%.}" != "$DEVICE" -o "${DEVICE##vlan}" != "$DEVICE" ] ; then vlaninterfaces="$vlaninterfaces $i" continue fi if ( . ./ifcfg-"$i" ; is_false "$ONBOOT" ) ; then # this loads the module, to preserve ordering is_available $i continue fi action $"Bringing up interface $i: " ./ifup $i boot [ $? -ne 0 ] && rc=1 done # Bring up xDSL and VPN interfaces for i in $vlaninterfaces $bridgeinterfaces $xdslinterfaces $vpninterfaces ; do if ( . ./ifcfg-"$i" ; ! is_false "$ONBOOT" ) ; then action $"Bringing up interface $i: " ./ifup $i boot [ $? -ne 0 ] && rc=1 fi done # Add non interface-specific static-routes. if [ -f /etc/sysconfig/static-routes ]; then if [ -x /sbin/route ]; then grep "^any" /etc/sysconfig/static-routes \| while read ignore args ; do /sbin/route add -$args done else net_log $"Legacy static-route support not available: /sbin/route not found" fi fi # IPv6 hook (post IPv4 start) if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then /etc/sysconfig/network-scripts/init.ipv6-global start post fi # Run this again to catch any interface-specific actions apply_sysctl touch /var/lock/subsys/network [ -n "${NETWORKDELAY}" ] && /bin/sleep ${NETWORKDELAY} ;; stop) [ "$EUID" != "0" ] && exit 4 # Don't shut the network down if root or /usr is on NFS or a network # block device. if systemctl show --property=RequiredBy -- -.mount usr.mount \| grep -q 'remote-fs.target' ; then net_log $"rootfs or /usr is on network filesystem, leaving network up" exit 1 fi # Don't shut the network down when shutting down the system if configured # as such in sysconfig if is_false "$IFDOWN_ON_SHUTDOWN"; then if systemctl is-system-running \| grep -q 'stopping'; then net_log $"system is shutting down, leaving interfaces up as requested" info exit 0 fi fi vlaninterfaces="" vpninterfaces="" xdslinterfaces="" bridgeinterfaces="" remaining="" rc=0 # get list of bonding, vpn, and xdsl interfaces for i in $interfaces; do unset DEVICE TYPE eval $(LANG=C grep -F "DEVICE=" ifcfg-$i) eval $(LANG=C grep -F "TYPE=" ifcfg-$i) if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi if [ "${DEVICE##cipcb}" != "$DEVICE" ] ; then vpninterfaces="$vpninterfaces $i" continue fi if [ "$TYPE" = "IPSEC" ] \|\| [ "$TYPE" = "IPIP" ] \|\| [ "$TYPE" = "GRE" ]; then vpninterfaces="$vpninterfaces $i" continue fi if [ "$TYPE" = "Bridge" ]; then bridgeinterfaces="$bridgeinterfaces $i" continue fi if [ "$TYPE" = "xDSL" -o "$TYPE" = "Modem" ]; then xdslinterfaces="$xdslinterfaces $i" continue fi if [ "${DEVICE%%.}" != "$DEVICE" -o "${DEVICE##vlan}" != "$DEVICE" ] ; then vlaninterfaces="$vlaninterfaces $i" continue fi remaining="$remaining $i" done for i in $vpninterfaces $xdslinterfaces $bridgeinterfaces $vlaninterfaces $remaining; do unset DEVICE TYPE (. ./ifcfg-$i if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi if ! check_device_down $DEVICE; then action $"Shutting down interface $i: " ./ifdown $i boot [ $? -ne 0 ] && rc=1 fi ) done action $"Shutting down loopback interface: " ./ifdown ifcfg-lo sysctl -w net.ipv4.ip_forward=0 > /dev/null 2>&1 # IPv6 hook (post IPv4 stop) if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then /etc/sysconfig/network-scripts/init.ipv6-global stop post fi rm -f /var/lock/subsys/network ;; status) echo $"Configured devices:" echo lo $interfaces echo $"Currently active devices:" echo $(/sbin/ip -o link show up \| awk -F ": " '{ print $2 }') ;; restart\|force-reload) cd "$CWD" $0 stop $0 start rc=$? ;; ) echo $"Usage: $0 {start\|stop\|status\|restart\|force-reload}" exit 2 esac exit $rc ��

| ver. 1.4 | Github | . | PHP 8.0.30 | Генерация страницы: 0 | proxy | phpinfo | Настройка